Durethan® DPBKV60H2.0EF

60%유리섬유강화, 사출 성형, 열안정, 높은 흐름성

결과 목록으로 돌아 가기

일반 정보

Durethan® is the trade name for our range of engineering thermoplastics based on polyamide 6 and polyamide 66. These polyamides are partially crystalline thermoplastics which offer an ideal combination of properties, especially for technical applications. They provide high mechanical strength and stiffness, good dielectric properties, high resistance to both heat and chemical attack, and good friction and wear properties.
특징
  • Good or high flow
  • Heat stabilized
다운로드
각종규제
  • Absence Declaration BNST2023-11-16
  • Absence Declaration Biocidal Products2025-11-21
  • Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
  • Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
  • Absence Declaration Nano Materials2023-11-16
  • Absence Declaration Ozone Depleting Chemicals and F-gasses2025-02-06
  • Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2025-04-14
  • Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
  • Absence Declaration PFAS2025-01-31
  • Absence Declaration POPs (Persistent Organic Pollutants)2025-10-21
  • Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
  • Absence Declaration Red Phosphorus2023-11-16
  • CALIFORNIA PROPOSITION 65 (carbon black)2025-01-20
  • Compliance Statement Sanctions and Embargos2025-11-24
  • Conflict minerals declaration (EICC, GeSI)2025-10-21
  • Deforestation Statement, Regulation (EU) 2023/1115 (EUDR)2025-11-03
  • EMRT Statement2025-05-27
  • Micro Plastics Statement2025-09-22
  • Packaging Declaration EU Decision 97/129/EC (labelling)2024-04-17
  • Packaging, Packaging Waste (EU) 2025/40 and CONEG declaration2025-06-24
  • REACH Registration Statement2024-03-27
  • REACH STATEMENT TURKIYE2025-12-03
  • RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
  • SVHC, REACH Annex XIV and –XVII Statement2025-11-06
Yellow Card
성형 기술
사출성형
자동차 OEM
GM
OEM 규격
GMW3029
용도
문의 (영문)

유변학적 특성

성형 수축률. 평행
0.28
%
성형 수축률. 수직
0.46
%

기계적 특성

인장탄성률
20500
MPa
인장탄성률 (-40°C)
21300
MPa
인장탄성률 (40°C)
17800
MPa
인장탄성률 (100°C)
8920
MPa
인장탄성률 (120°C)
8290
MPa
인장탄성률 (140°C)
7710
MPa
인장탄성률 (160°C)
7890
MPa
인장탄성율 (180°C)
7420
MPa
인장탄성율 (200°C)
6050
MPa
파단시 강도
230
MPa
파단시 신율
2.4
%
굴곡탄성률
20000
MPa
굴곡강도
370
MPa
챠피 충격 강도 +23°C
90
kJ/m²
챠피 충격 강도 -30°C
90
kJ/m²
챠피 노치드 충격 강도 +23°C
16
kJ/m²
챠피 노치드 충격 강도 -30°C
16
kJ/m²
아이조드 노치드 충격강도 (23°C)
16
kJ/m²

열적 특성

녹는점 (10 °C/MIN)
221
°C
하중하에서의 변형온도 (1.80 MPa)
213
°C
하중하에서의 변형온도 (0.45 MPa)
220
°C
하중하에서의 변형온도 (8.0 MPa)
190
°C
선형 열팽창 계수, 평행
0.12
E-4/°C
선형 열팽창 계수, 수직
0.75
E-4/°C
두께 H인 제품의 난연성
HB
class
두께 H인 제품의 난연성
HB
class

전기적 특성

상대 유전율 (100Hz)
5.3
-
상대 유전뮬 (1MHz)
4.7
-
소산 인자 100Hz
164
E-4
소산 인자 1MHz
177
E-4
부피 저항
5.8E12
Ohm*m
전기 압력
33
kV/mm
CTI (비교 표면전도 지수)
600
V

기타 특성

23°C 물에서의 흡수성
3.6
%
23°C/50% R.H.조건에서의 흡습성
1.1
%
밀도
1720
kg/m³

물질의 비성질

Drying temperature dry air dryer
80
°C
Drying time dry air dryer
2-6
h
Residual moisture content
0.05-0.15
%
Melt temperature (Tmin - Tmax)
270-290
°C
Mold temperature
80-120
°C

도표

어플리케이션

Cross Car Beam

산업
Automotive
재료
  • •} Weight reduction of 20–30% vs. steel structures
  • •} High stiffness and strength – suitable for NVH and crash loads
  • •} Excellent functional integration (brackets, clips, ducts, etc.)
  • •} Cost-effective, scalable production using standard machinery
  • •} Sustainable: lower carbon footprint than traditional metals
  • •} High precision and dimensional reproducibility
}
자세한 정보

Front End Modules

산업
Automotive
재료
  • •} 20–30% overall weight reduction vs. metal alternatives
  • •} Higher temperature resistance and creep performance vs. PP
  • •} Superior surface appearance compared to PA66
  • •} Thin-wall designs and complex geometries via light-flowing grades
  • •} Improved integration of structural and mounting functions
  • •} Robust and sustainable hybrid solutions (plastic/metal, hollow profiles)
}
자세한 정보