Application requirements
Glow wire end product no flame above 750°C
Good performance on main OEM tests
V0 at 0.4mm
Material properties
Glow wire end product above 850°C
V0 at 0.4mm
CTI 450V}
Application requirements
Biaxially oriented co-extrusion film
Air-cooled blown co-extrusion film
Deep-draw thermoforming film
Material properties
Slow crystallization but high end-level crystallinity}
Akulon® PA6 is a reliable solution for chair frames compared to metals as no corrosion protection coating is needed with PA6. Akulon UltraFlow PA6 yields a better surface appearance than PA66 (even at 50% to 60% GF). Arnitel® TPC is approved for seat suspension, Stanyl® PA46 is approved for bearings and sliding parts, and EcoPaXX® PA410 is a 70 % bio-based alternative.}
•}
The high viscous Akulon® F132 range is suitable for cast film. This range contains grades with lubrication, nucleation agent or a combination of those
The very high viscous Akulon® F136 range is suitable for blown film. This range contains grades with lubrication, nucleation agent or a combination of those.}
Most grades are available with halogenfree flameretardancy, and in specific electro-grey colour for housings. Also Lasermarkable grades are available. ForTii® has a Heat Deflection Temperature (HDT) of 305°C .}
Application requirements
Withstand under-the-hood temperatures of 105 to 150°C
Internal coolant temperatures
Withstand exposure to water/glycol
Good welding properties
Material properties
Superior chemical stability and weld-line strength after ageing
Excellent for under the bonnet conditions and temperatures}
Akulon® PA6 is a reliable solution for corkscrews compared to metals as no corrosion protection coating is needed with PA6. Akulon UltraFlow PA6 yields a better surface appearance than PA66 (even at 50% to 60% GF).}
The Cylinder head cover has to seal the engine oil and air between the engine room and cylinder head. However, in the case of a 2wheel, they are often connected by 2 to 4 bolts where a rubber gasket is used. The rubber gasket has a high reaction force so flange of the cylinder head often leaks out between the cylinder head and the head cover.}
Envalior’s portfolio of Akulon® PA6 and Arnite® PBT solutions for electric vehicle charging plugs can offer better surface appearance and mechanical performance without the need for expensive flame retardant additives. As electrical vehicle (EV) sales around the world continue to grow, Envalior is partnering with automakers and suppliers to develop advanced materials solutions to improve EV charging.}
The very high viscous Akulon® F136 range is suitable for blown film. This range contains grades with lubrication, nucleation agent or a combination of those.}
The high viscous Akulon® F132 range is suitable for cast film. This range contains grades with lubrication, nucleation agent or a combination of those.}
The fuse holder is a vital element in LVSG that protects different electrical loads against short circuit current. The application houses the fuse and facilitates easy assembly or replacement. Herein, the thermoplastic materials from Envalior Engineering Materials offer an advantage over traditional materials.}
Akulon® PA6 is a reliable solution for grill handles compared to metals as no corrosion protection coating is needed with PA6. Akulon UltraFlow PA6 yields a better surface appearance than PA66 (even at 50% to 60% GF). Akulon L types of PA6 yield good UV-resistance. Akulon UltraFlow PA6 enables thin-walled designs.}
Application requirements
Superior electrical performance
Dedicated high voltage
High mechanical strength
Material properties
CTI 600V, RTI 140°C
Halogen-free
UL94-V0 @ 0.75mm
Superior processability}
Application requirements
Electrical insulation
High CTI 600 V
UL94 V0 halogen-free
Thermal cycles/shock resistant
Material properties
Low moisture uptake
Chemical resistant
Thermal cycles/fatigue
Electric insulative}
Most grades are available with halogenfree flameretardancy, and in specific electro-grey colour for housings. ForTii® Heat Deflection Temperature (HDT) of 305°C .}
Most grades are available with halogenfree flameretardancy, and in specific electro-grey colour for housings. ForTii® Heat Deflection Temperature (HDT) of 305°C .}
The very high viscous Akulon® F136 range is suitable for blown film. This range contains grades with lubrication, nucleation agent or a combination of those.}
The high viscous Akulon® F132 range is suitable for cast film. This range contains grades with lubrication, nucleation agent or a combination of those.}
The high viscous Akulon® F130 range is suitable for BOPA. This range contains virgin and lubricated grades. Good sterilization properties are mandatory in the world of Medical Instrument Packaging. The Akulon® PA6 grades fulfil all required needs, including the good oxygen barrier properties.}
The very high viscous Akulon® F136 range is suitable for blown film. This range contains grades with lubrication, nucleation agent or a combination of those. Good sterilization properties are mandatory in the world of Medical Instrument Packaging. The Akulon® PA6 grades fulfil all required needs, including the good oxygen barrier properties.}
The high viscous Akulon® F132 range is suitable for cast film. This range contains grades with lubrication, nucleation agent or a combination of those. Good sterilization properties are mandatory in the world of Medical Instrument Packaging. The Akulon® PA6 grades fulfil all required needs, including the good oxygen barrier properties.}
Most grades are available with halogenfree flameretardancy, and in specific electro-grey colour for housings. Also Lasermarkable grades are available. ForTii® has a Heat Deflection Temperature (HDT) of 305°C .}
Ultimate durable connector for outdoor use. It is a connector that links Solar Panels and other relevantt units in Photovoltaic electrical power generation. It can withstand fierce conditions in outdoor use.}
Akulon® PA6 is a reliable solution for power tool housings due to its lighter weight compared to metals, possible part and function integration, easier assembly and longer tool lives. It has better welding strength and surface appearance than PA66. Akulon UltraFlow PA6 has outstanding mechanical properties over a wide temperature range and in diverse conditions.}
Akulon® PA6 is a reliable solution for snowmobile front and rear bumpers because it offers a 6.5% weight savings, leading to 23% cost savings and a 30% assembly-time-reduction compared to previous polyethylene-covered steel tube bumpers. This maintains the desired stiffness and improved impact strength. Also, it has outstanding mechanical properties over a wide temperature range and in diverse conditions. Stanyl® PA46 is used for the engine parts of off-road vehicles as well.}
Akulon® PA6 is a reliable solution for snowmobile rear seat handles because it offers a 6.5% weight savings, leading to 23% cost savings and a 30% assembly-time-reduction compared to previous polyethylene-covered steel tube bumpers. This maintains the desired stiffness and improved impact strength. Also, it has outstanding mechanical properties over a wide temperature range and in diverse conditions. Stanyl® PA46 is used for the engine parts of off-road vehicles as well.}
Akulon® UltraFlow PA6 is a reliable solution for solarium hinges due to its good mechanical properties (stiffness and toughness) and its better surface appearance than PA66. Akulon UltraFlow PA6 allows for high productivity rates (up to 25% cycle time advantage in molding). Akulon® UltraFlow K-FG12 is 60% glass-reinforced, and had outstanding mechanical properties over a wide temperature range.}
Stanyl® PA46 and Akulon® PA66 are reliable solutions for spatulas and other kitchenware. Stanyl PA46 offers much higher melting temperature and HDT than PA66, and both materials have significantly higher melting temperature resistance than PP and PA6. Also, Stanyl TE200F6-FC and EcoPaXX® Q-KG6-FC are food-approved.}
Application requirements :
Good surface finish
Good mechanical properties
Circular material
Material properties
Performance equivalent to the virgin counterpart
Good surface finish of molded article
Good flow behavior}
The switch is a high volume item in the LVSG domain. It facilitates connection / disconnection & continuation of electricity. Switch base ,back plate- ,front plates produced with Envalior Engineering Plastic materials offer several advantages}
Akulon® PA6 has an excellent long term heat ageing resistance, and is very tough at low temperatures. The weldability is good, with high weldline strength (important in case of additional functions like oil pump or filter integration). Already approved for applications in the oil circuit like CHC (Cylinder Head Covers).}
For more than 20 years, Envalior has helped the world’s leading automakers improve the performance and efficiency of timing chain systems, wear guide faces, support arms, and related thermoplastic components through advanced material science.
Envalior offers a full portfolio of durable thermoplastic materials formulated to reduce timing chain friction and improve efficiency. To protect the environment and aid regulatory compliance, Envalior offers letters of conformity for any grades with PTFE confirming they do not contain harmful PFAS or PFOA.
In addition, Envalior offers superior PTFE-free solutions with best-in-class low-friction performance such as Stanyl® HGR3.}