Durethan® BM29XH2.0EF
30%유리섬유/미네랄 강화, 사출 성형, 열안정, 높은 흐름성
일반 정보
Durethan® is the trade name for our range of engineering thermoplastics based on polyamide 6 and polyamide 66. These polyamides are partially crystalline thermoplastics which offer an ideal combination of properties, especially for technical applications. They provide high mechanical strength and stiffness, good dielectric properties, high resistance to both heat and chemical attack, and good friction and wear properties.
특징
- Good or high flow
- Heat stabilized
각종규제
- Absence Declaration BNST2023-11-16
- Absence Declaration Biocidal Products2025-11-21
- Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
- Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
- Absence Declaration Nano Materials2023-11-16
- Absence Declaration Ozone Depleting Chemicals and F-gasses2025-02-06
- Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2025-04-14
- Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
- Absence Declaration PFAS2025-01-31
- Absence Declaration POPs (Persistent Organic Pollutants)2025-10-21
- Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
- Absence Declaration Red Phosphorus2023-11-16
- Compliance Statement Sanctions and Embargos2025-11-24
- Conflict minerals declaration (EICC, GeSI)2025-10-21
- Deforestation Statement, Regulation (EU) 2023/1115 (EUDR)2025-11-03
- EMRT Statement2025-05-27
- Micro Plastics Statement2025-09-22
- Packaging Declaration EU Decision 97/129/EC (labelling)2024-04-17
- Packaging, Packaging Waste (EU) 2025/40 and CONEG declaration2025-06-24
- REACH Registration Statement2024-03-27
- RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
- SVHC, REACH Annex XIV and –XVII Statement2025-11-06
성형 기술
사출성형
사출성형
자동차 OEM
GM
GM
OEM 규격
GMW15702
GMW15702
유변학적 특성
성형 수축률. 평행
0.45
%
ISO 294-4
성형 수축률. 수직
0.65
%
ISO 294-4
기계적 특성
인장탄성률
6500
MPa
ISO 527-1/-2
인장탄성률 (-40°C)
7500
MPa
ISO 527-1/-2
인장탄성률 (40°C)
5540
MPa
ISO 527-1/-2
인장탄성률 (100°C)
2500
MPa
ISO 527-1/-2
인장탄성률 (120°C)
2420
MPa
ISO 527-1/-2
인장탄성률 (140°C)
2300
MPa
ISO 527-1/-2
인장탄성률 (160°C)
2140
MPa
ISO 527-1/-2
인장탄성율 (180°C)
1910
MPa
ISO 527-1/-2
인장탄성율 (200°C)
1610
MPa
ISO 527-1/-2
파단시 강도
110
MPa
ISO 527-1/-2
파단시 신율
3
%
ISO 527-1/-2
굴곡탄성률
6400
MPa
ISO 178
굴곡강도
180
MPa
ISO 178
챠피 충격 강도 +23°C
35
kJ/m²
ISO 179/1eU
챠피 충격 강도 -30°C
30
kJ/m²
ISO 179/1eU
열적 특성
녹는점 (10 °C/MIN)
220
°C
ISO 11357-1/-3
하중하에서의 변형온도 (1.80 MPa)
190
°C
ISO 75-1/-2
하중하에서의 변형온도 (0.45 MPa)
210
°C
ISO 75-1/-2
선형 열팽창 계수, 평행
0.4
E-4/°C
ISO 11359-1/-2
선형 열팽창 계수, 수직
0.9
E-4/°C
ISO 11359-1/-2
1.5mm 평균두께에서의 난연성
HB
class
IEC 60695-11-10
난연성 (테스트 두께)
1.5
mm
IEC 60695-11-10
전기적 특성
CTI (비교 표면전도 지수)
425
V
IEC 60112
기타 특성
23°C 물에서의 흡수성
7
%
Sim. to ISO 62
23°C/50% R.H.조건에서의 흡습성
2.2
%
Sim. to ISO 62
밀도
1360
kg/m³
ISO 1183
물질의 비성질
Drying temperature dry air dryer
80
°C
Drying time dry air dryer
2-6
h
Residual moisture content
0.03-0.12
%
acc. to Karl Fischer
Melt temperature (Tmin - Tmax)
270-290
°C
Mold temperature
80-100
°C
