Durethan® AKV35XTS2
35%유리섬유강화, 사출 성형, 열안정, 뛰어난 외관 특성
일반 정보
Durethan® is the trade name for our range of engineering thermoplastics based on polyamide 6 and polyamide 66. These polyamides are partially crystalline thermoplastics which offer an ideal combination of properties, especially for technical applications. They provide high mechanical strength and stiffness, good dielectric properties, high resistance to both heat and chemical attack, and good friction and wear properties.
특징
- Good surface properties
- Heat stabilized
각종규제
- Absence Declaration BNST2023-11-16
- Absence Declaration Biocidal Products2025-11-21
- Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
- Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
- Absence Declaration Nano Materials2023-11-16
- Absence Declaration Ozone Depleting Chemicals and F-gasses2025-02-06
- Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2025-04-14
- Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
- Absence Declaration POPs (Persistent Organic Pollutants)2025-10-21
- Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
- Absence Declaration Red Phosphorus2023-11-16
- Compliance Statement Sanctions and Embargos2025-11-24
- Conflict minerals declaration (EICC, GeSI)2025-10-21
- Deforestation Statement, Regulation (EU) 2023/1115 (EUDR)2025-11-03
- EMRT Statement2025-05-27
- Micro Plastics Statement2025-09-22
- Packaging Declaration EU Decision 97/129/EC (labelling)2024-04-17
- Packaging, Packaging Waste (EU) 2025/40 and CONEG declaration2025-06-24
- REACH Registration Statement2024-03-27
- RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
- SVHC, REACH Annex XIV and –XVII Statement2025-11-06
성형 기술
사출성형
사출성형
유변학적 특성
성형 수축률. 평행
0.2
%
ISO 294-4
성형 수축률. 수직
0.8
%
ISO 294-4
기계적 특성
인장탄성률
11600
MPa
ISO 527-1/-2
인장탄성률 (-40°C)
12000
MPa
ISO 527-1/-2
인장탄성률 (40°C)
10800
MPa
ISO 527-1/-2
인장탄성률 (100°C)
4590
MPa
ISO 527-1/-2
인장탄성률 (120°C)
4150
MPa
ISO 527-1/-2
인장탄성률 (140°C)
3830
MPa
ISO 527-1/-2
인장탄성률 (160°C)
3600
MPa
ISO 527-1/-2
인장탄성율 (180°C)
3340
MPa
ISO 527-1/-2
인장탄성율 (200°C)
3020
MPa
ISO 527-1/-2
파단시 강도
205
MPa
ISO 527-1/-2
파단시 신율
3.2
%
ISO 527-1/-2
굴곡탄성률
11000
MPa
ISO 178
굴곡강도
315
MPa
ISO 178
챠피 충격 강도 +23°C
70
kJ/m²
ISO 179/1eU
챠피 충격 강도 -30°C
60
kJ/m²
ISO 179/1eU
챠피 노치드 충격 강도 +23°C
10
kJ/m²
ISO 179/1eA
아이조드 노치드 충격강도 (23°C)
10
kJ/m²
ISO 180/1A
최대 관통힘 +23°C
760
N
ISO 6603-2
최대 관통힘 -30°C
720
N
ISO 6603-2
관통 에너지 +23°C
2.5
J
ISO 6603-2
관통 에너지 -30°C
2.5
J
ISO 6603-2
열적 특성
녹는점 (10 °C/MIN)
260
°C
ISO 11357-1/-3
하중하에서의 변형온도 (1.80 MPa)
235
°C
ISO 75-1/-2
하중하에서의 변형온도 (0.45 MPa)
250
°C
ISO 75-1/-2
선형 열팽창 계수, 평행
0.2
E-4/°C
ISO 11359-1/-2
선형 열팽창 계수, 수직
0.8
E-4/°C
ISO 11359-1/-2
전기적 특성
CTI (비교 표면전도 지수)
525
V
IEC 60112
기타 특성
밀도
1430
kg/m³
ISO 1183
물질의 비성질
Drying temperature dry air dryer
80
°C
Drying time dry air dryer
2-6
h
Residual moisture content
0.03-0.12
%
acc. to Karl Fischer
Melt temperature (Tmin - Tmax)
270-290
°C
Mold temperature
80-100
°C
