Durethan® BKV60H2.0EF DUS060
60% 玻纤增强, 注塑成型, 热稳定, 高流动性
通用信息
Durethan® is the trade name for our range of engineering thermoplastics based on polyamide 6 and polyamide 66. These polyamides are partially crystalline thermoplastics which offer an ideal combination of properties, especially for technical applications. They provide high mechanical strength and stiffness, good dielectric properties, high resistance to both heat and chemical attack, and good friction and wear properties.
特殊性能
- 良好或高流动性
- 热稳定性或耐热性
法规
- Absence Declaration BNST2023-11-16
- Absence Declaration Biocidal Products2025-11-21
- Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
- Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
- Absence Declaration Nano Materials2023-11-16
- Absence Declaration Ozone Depleting Chemicals and F-gasses2025-02-06
- Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2025-04-14
- Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
- Absence Declaration POPs (Persistent Organic Pollutants)2025-10-21
- Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
- Absence Declaration Red Phosphorus2023-11-16
- CALIFORNIA PROPOSITION 65 (carbon black)2025-01-20
- Compliance Statement Sanctions and Embargos2025-11-24
- Conflict minerals declaration (EICC, GeSI)2025-10-21
- Deforestation Statement, Regulation (EU) 2023/1115 (EUDR)2025-11-03
- EMRT Statement2025-05-27
- Micro Plastics Statement2025-09-22
- Packaging Declaration EU Decision 97/129/EC (labelling)2024-04-17
- Packaging, Packaging Waste (EU) 2025/40 and CONEG declaration2025-06-24
- REACH Registration Statement2024-03-27
- RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
- SVHC, REACH Annex XIV and –XVII Statement2025-11-06
流变性能
成型收缩率(平行)
0.28
%
ISO 294-4
成型收缩率(垂直)
0.47
%
ISO 294-4
机械性能
拉伸模量
20000
MPa
ISO 527-1/-2
拉伸模量 (-40°C)
20800
MPa
ISO 527-1/-2
拉伸模量 (40°C)
16800
MPa
ISO 527-1/-2
拉伸模量 (100°C)
9460
MPa
ISO 527-1/-2
拉伸模量 (120°C)
8950
MPa
ISO 527-1/-2
拉伸模量 (140°C)
8450
MPa
ISO 527-1/-2
拉伸模量 (160°C)
7940
MPa
ISO 527-1/-2
拉伸模量 (180°C)
7290
MPa
ISO 527-1/-2
拉伸模量 (200°C)
6270
MPa
ISO 527-1/-2
断裂应力
225
MPa
ISO 527-1/-2
断裂伸长率
2.4
%
ISO 527-1/-2
弯曲模量
19300
MPa
ISO 178
弯曲强度
365
MPa
ISO 178
简支梁无缺口冲击强度(+23°C)
90
kJ/m²
ISO 179/1eU
简支梁无缺口冲击强度(-30°C)
90
kJ/m²
ISO 179/1eU
简支梁缺口冲击强度(+23°C)
16
kJ/m²
ISO 179/1eA
简支梁缺口冲击强度(-30°C)
16
kJ/m²
ISO 179/1eA
悬臂梁缺口冲击强度(23°C)
16
kJ/m²
ISO 180/1A
最大刺穿力(+23°C)
1250
N
ISO 6603-2
最大刺穿力（-30°C)
1100
N
ISO 6603-2
刺穿能(+23°C)
3.1
J
ISO 6603-2
刺穿能（-30°C)
2.2
J
ISO 6603-2
热性能
熔融温度(10°C/min)
222
°C
ISO 11357-1/-3
热变形温度(1.80 MPa)
213
°C
ISO 75-1/-2
热变形温度(0.45 MPa)
220
°C
ISO 75-1/-2
线热膨胀系数(平行)
0.12
E-4/°C
ISO 11359-1/-2
线热膨胀系数(垂直)
0.75
E-4/°C
ISO 11359-1/-2
电性能
相对介电常数(100Hz)
5.3
-
IEC 62631-2-1
相对介电常数(1MHz)
4.7
-
IEC 62631-2-1
介质损耗因子(100Hz)
164
E-4
IEC 62631-2-1
介质损耗因子(1MHz)
177
E-4
IEC 62631-2-1
体积电阻率
5.8E12
Ohm*m
IEC 62631-3-1
介电强度
33
kV/mm
IEC 60243-1
相对漏电起痕指数
600
V
IEC 60112
其它性能
吸水率
3.6
%
Sim. to ISO 62
吸湿率
1.3
%
Sim. to ISO 62
密度
1700
kg/m³
ISO 1183
材料特性
空气干燥机干燥温度
80
°C
空气干燥机干燥温度
2-6
h
残余水分含量
0.05-0.15
%
acc. to Karl Fischer
熔体温度(Tmin - Tmax)
270-290
°C
模具温度
80-120
°C
图表
应用
Engine Mounts
行业
Automotive
材料
Akulon® UltraFlow PA66 and Durethan® PA6 50% GF both exhibit excellent fatigue resistance, ideal for demanding structural applications. These materials deliver high mechanical performance while enabling significant weight reduction and design flexibility.}
Engine Mounts
行业
Automotive
材料
Akulon® UltraFlow PA66 and Durethan® PA6 50% GF both exhibit excellent fatigue resistance, ideal for demanding structural applications. These materials deliver high mechanical performance while enabling significant weight reduction and design flexibility.}
