Stanyl® TW271B6

30% Carbon Reinforced, 熱安定, 磨耗摩擦改良

結果に戻る

一般情報

Stanyl®は、自動車、電気・電子機器のギア、汎用エンジン用途に使用されている高性能ポリアミド46です。
Stanyl®は 、優れた耐熱性、靭性、耐摩耗・摺動性、高い流動性が要求されるような過酷な用途にも対応し、高い性能を発揮します。
Stanyl®は220 ℃の高温でも機械的特性を維持するため、PPA（PA6T、PA9T）及びPPSやLCPを上回るような極めて高い性能が要求される用途に理想的な樹脂材料です。
製品
Stanyl®TW271B6は、摩擦調整された高熱ポリアミドであり、特に高温で優れた耐クリープ性、強度、剛性、耐疲労性を提供し、サイクルタイムの利点と優れた流動性を兼ね備えています。TW271B6は、ギアアプリケーションで優れた実績があります。
特徴
  • Heat stabilized
  • Wear and friction modified
ダウンロード
各種規制
  • Absence Declaration BNST2023-11-16
  • Absence Declaration Biocidal Products2023-11-16
  • Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
  • Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
  • Absence Declaration EPA 20 High Priority Substances 20192023-11-16
  • Absence Declaration Food Allergens2023-11-16
  • Absence Declaration NMP (N-Methylpyrrolidone)2023-11-16
  • Absence Declaration Nano Materials2023-11-16
  • Absence Declaration Ozone Depleting Chemicals2024-06-27
  • Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2023-11-16
  • Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
  • Absence Declaration PFAS (PTFE containing)2024-03-05
  • Absence Declaration POPs (Persistent Organic Pollutants)2024-09-04
  • Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
  • Absence Declaration Red Phosphorus2023-11-16
  • Absence Declaration opBDE (2003/11/EC: Octa- / Pentabromodiphenylether)2023-11-16
  • CALIFORNIA PROPOSITION 65 (NDS)2024-01-02
  • Compliance Statement EU Sanctions and Embargos2024-05-16
  • Conflict minerals declaration (EICC, GeSI)2024-05-15
  • Deforestation Statement, Regulation (EU) 2023/1115 (EUDR)2024-09-19
  • Packaging Declaration EU Decision 97/129/EC (labelling)2024-04-17
  • Packaging, Packaging Waste and CONEG declaration (94/62/EC)2021-12-06
  • REACH Registration Statement2024-03-27
  • REACH STATEMENT KOREA2023-11-16
  • REACH STATEMENT TURKYE2023-11-16
  • RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
  • SVHC, REACH Annex XIV and –XVII Statement2024-11-08
成形方法
Injection Molding
テクノロジー
Wear & Friction
自動車OEM
GM
OEM製品規格
GMW15702-021751-PA46-CF30
用途
お問い合わせ(英語)

流動特性

成形収縮率 (流れ方向）
0.3
%
成形収縮率 (垂直方向)
0.7
%

機械特性

引張弾性率
24000
MPa
引張弾性率 (120℃)
13500
MPa
引張弾性率 (160℃)
12000
MPa
引張弾性率 (180℃)
11500
MPa
引張弾性率 (200℃)
11000
MPa
引張破断強度
260
MPa
引張破断強度 (120℃)
140
MPa
引張破断強度 (160℃)
115
MPa
引張破断強度 (180℃)
105
MPa
引張破断強度 (200℃)
95
MPa
引張破断ひずみ
1.6
%
引張破断ひずみ (120℃)
3.1
%
引張破断ひずみ (160℃)
3.1
%
引張破断ひずみ (180℃)
3.1
%
引張破断ひずみ (200℃)
3.1
%
曲げ弾性率
22000
MPa
曲げ強度
365
MPa
シャルピー衝撃強さ (23℃)
50
kJ/m²
シャルピー衝撃強さ (-30℃)
50
kJ/m²
シャルピー衝撃強さ ノッチ付き (23℃)
8
kJ/m²
シャルピー衝撃強さ ノッチ付き (-30℃)
7
kJ/m²

熱的特性

融点 (10℃/min)
295
°C
ガラス転移温度 (10℃/min)
75
°C
荷重たわみ温度 (1.8MPa)
290
°C
線膨張係数 (流れ方向)
0.25
E-4/°C
線膨張係数 (垂直方向)
0.35
E-4/°C

その他特性

吸水率 (水中)
8.7
%
吸水率 水中23℃、24時間
2.4
%
吸湿率 (23℃/50％ RH)
2.3
%
密度
1320
kg/m³

材料特性

粘度数
150
cm³/g

図表

用途

Coolant valve actuators

産業
Automotive
材料
  • •} Higher torque and durability performance than PPA and PA66
  • •} Allows more compact actuator design and weight savings
  • •} Comparable performance to specialized materials without the need for expensive additives (e.g., carbon fiber or wear & friction optimizers) creates opportunities for cost savings
}
詳細情報

CRB Cap

産業
Automotive
材料
CRB Cap is a press fitted cap on the clutch release bearing. The cap comes in contact with the diaphragm spring of the clutch when the clutch is pressed for disengaging the transmission with the engine. This cap isolates metal to metal contact of CRB flange and diaphragm spring fingers.}
詳細情報

CRB Housing

産業
Automotive
材料
The component is a plastic housing, enclosing the clutch release bearing (CRB). The housing slides over the sleeve and the clutch pedal operates the fork shaft which moves the CRB housing. The housing also encloses grease that serves as lubrication of the CRB.}
詳細情報

Electronic throttle control actuators

産業
Automotive
材料
  • •} Higher torque and durability performance than PPA and PA66
  • •} Allows more compact actuator design and weight savings
  • •} Comparable performance to specialized materials without the need for expensive additives (e.g., carbon fiber or wear & friction optimizers) creates opportunities for cost savings
}
詳細情報

Exhaust gas recirculation actuators

産業
Automotive
材料
  • •} Higher torque and durability performance than PPA and PA66
  • •} Allows more compact actuator design and weight savings
  • •} Comparable performance to specialized materials without the need for expensive additives (e.g., carbon fiber or wear & friction optimizers) creates opportunities for cost savings
}
詳細情報

Gears

産業
Automotive
材料
Envalior is a global leader in the design, engineering and testing of advanced thermoplastic materials for gears and actuation systems. Automakers and other global manufacturers trust Envalior Engineering Materials to improve the performance of complex automotive applications, appliances, consumer goods, and industrial applications. In fact, Stanyl® is used in nearly 40 million gears in 100 million automotive actuation systems each year, making it one of the most popular thermoplastic gear materials in the world.}
詳細情報

Turbo actuators

産業
Automotive
材料
  • •} Higher torque and durability performance than PPA and PA66
  • •} Allows more compact actuator design and weight savings
  • •} Comparable performance to specialized materials without the need for expensive additives (e.g., carbon fiber or wear & friction optimizers) creates opportunities for cost savings
}
詳細情報