Durethan® DPAKV30HREF
30%ガラス強化, 射出成形, 熱安定, 加水分解耐性, 流動性改良
一般情報
Durethan® is the trade name for our range of engineering thermoplastics based on polyamide 6 and polyamide 66. These polyamides are partially crystalline thermoplastics which offer an ideal combination of properties, especially for technical applications. They provide high mechanical strength and stiffness, good dielectric properties, high resistance to both heat and chemical attack, and good friction and wear properties.
特徴
- Good or high flow
- Heat stabilized
- Hydrolysis resistant or enhanced hydrolytic stability
ダウンロード
各種規制
- Absence Declaration BNST2023-11-16
- Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
- Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
- Absence Declaration Nano Materials2023-11-16
- Absence Declaration Ozone Depleting Chemicals2024-06-27
- Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2023-11-16
- Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
- Absence Declaration POPs (Persistent Organic Pollutants)2023-10-27
- Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
- Absence Declaration Red Phosphorus2023-11-16
- Conflict minerals declaration (EICC, GeSI)2024-05-15
- REACH Registration Statement2024-03-27
- RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
- SVHC, REACH Annex XIV and –XVII Statement2024-06-27
成形方法
Injection Molding
Injection Molding
流動特性
成形収縮率 (流れ方向）
0.37
%
ISO 294-4
成形収縮率 (垂直方向)
0.82
%
ISO 294-4
機械特性
引張弾性率
8200
MPa
ISO 527-1/-2
引張弾性率 (-40℃)
9830
MPa
ISO 527-1/-2
引張弾性率 (40°C)
8500
MPa
ISO 527-1/-2
引張弾性率 (100°C)
4460
MPa
ISO 527-1/-2
引張弾性率 (120℃)
4080
MPa
ISO 527-1/-2
引張弾性率 (140℃)
3860
MPa
ISO 527-1/-2
引張弾性率 (160℃)
3670
MPa
ISO 527-1/-2
引張弾性率 (180℃)
3500
MPa
ISO 527-1/-2
引張弾性率 (200℃)
3420
MPa
ISO 527-1/-2
引張破断強度
150
MPa
ISO 527-1/-2
引張破断ひずみ
3.6
%
ISO 527-1/-2
曲げ弾性率
8100
MPa
ISO 178
曲げ強度
240
MPa
ISO 178
シャルピー衝撃強さ (23℃)
80
kJ/m²
ISO 179/1eU
シャルピー衝撃強さ (-30℃)
70
kJ/m²
ISO 179/1eU
シャルピー衝撃強さ ノッチ付き (23℃)
10
kJ/m²
ISO 179/1eA
アイゾット衝撃強さ ノッチ付き (23℃)
10
kJ/m²
ISO 180/1A
パンクチャー衝撃−最大応力 (+23℃)
774
N
ISO 6603-2
パンクチャー衝撃−最大応力 (-30℃)
756
N
ISO 6603-2
パンクチャー衝撃エネルギー (+23℃)
2.7
J
ISO 6603-2
パンクチャー衝撃エネルギー (-30℃)
2.5
J
ISO 6603-2
熱的特性
融点 (10℃/min)
263
°C
ISO 11357-1/-3
荷重たわみ温度 (1.8MPa)
240
°C
ISO 75-1/-2
荷重たわみ温度 (0.45MPa)
250
°C
ISO 75-1/-2
その他特性
密度
1320
kg/m³
ISO 1183
材料特性
Drying temperature dry air dryer
80
°C
Drying time dry air dryer
2-6
h
Residual moisture content
0.03-0.12
%
acc. to Karl Fischer
Melt temperature (Tmin - Tmax)
280-300
°C
Mold temperature
80-120
°C
