Durethan® BKV60H2.0EF DUS060
60%ガラス強化, 射出成形, 熱安定, ハイフロー
一般情報
Durethan® is the trade name for our range of engineering thermoplastics based on polyamide 6 and polyamide 66. These polyamides are partially crystalline thermoplastics which offer an ideal combination of properties, especially for technical applications. They provide high mechanical strength and stiffness, good dielectric properties, high resistance to both heat and chemical attack, and good friction and wear properties.
特徴
- Good or high flow
- Heat stabilized
各種規制
- Absence Declaration BNST2023-11-16
- Absence Declaration Biocidal Products2025-11-21
- Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
- Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
- Absence Declaration Nano Materials2023-11-16
- Absence Declaration Ozone Depleting Chemicals and F-gasses2025-02-06
- Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2025-04-14
- Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
- Absence Declaration POPs (Persistent Organic Pollutants)2025-10-21
- Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
- Absence Declaration Red Phosphorus2023-11-16
- CALIFORNIA PROPOSITION 65 (carbon black)2025-01-20
- Compliance Statement Sanctions and Embargos2025-11-24
- Conflict minerals declaration (EICC, GeSI)2025-10-21
- Deforestation Statement, Regulation (EU) 2023/1115 (EUDR)2025-11-03
- EMRT Statement2025-05-27
- Micro Plastics Statement2025-09-22
- Packaging Declaration EU Decision 97/129/EC (labelling)2024-04-17
- Packaging, Packaging Waste (EU) 2025/40 and CONEG declaration2025-06-24
- REACH Registration Statement2024-03-27
- RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
- SVHC, REACH Annex XIV and –XVII Statement2025-11-06
流動特性
成形収縮率 (流れ方向）
0.28
%
ISO 294-4
成形収縮率 (垂直方向)
0.47
%
ISO 294-4
機械特性
引張弾性率
20000
MPa
ISO 527-1/-2
引張弾性率 (-40℃)
20800
MPa
ISO 527-1/-2
引張弾性率 (40°C)
16800
MPa
ISO 527-1/-2
引張弾性率 (100°C)
9460
MPa
ISO 527-1/-2
引張弾性率 (120℃)
8950
MPa
ISO 527-1/-2
引張弾性率 (140℃)
8450
MPa
ISO 527-1/-2
引張弾性率 (160℃)
7940
MPa
ISO 527-1/-2
引張弾性率 (180℃)
7290
MPa
ISO 527-1/-2
引張弾性率 (200℃)
6270
MPa
ISO 527-1/-2
引張破断強度
225
MPa
ISO 527-1/-2
引張破断ひずみ
2.4
%
ISO 527-1/-2
曲げ弾性率
19300
MPa
ISO 178
曲げ強度
365
MPa
ISO 178
シャルピー衝撃強さ (23℃)
90
kJ/m²
ISO 179/1eU
シャルピー衝撃強さ (-30℃)
90
kJ/m²
ISO 179/1eU
シャルピー衝撃強さ ノッチ付き (23℃)
16
kJ/m²
ISO 179/1eA
シャルピー衝撃強さ ノッチ付き (-30℃)
16
kJ/m²
ISO 179/1eA
アイゾット衝撃強さ ノッチ付き (23℃)
16
kJ/m²
ISO 180/1A
パンクチャー衝撃−最大応力 (+23℃)
1250
N
ISO 6603-2
パンクチャー衝撃−最大応力 (-30℃)
1100
N
ISO 6603-2
パンクチャー衝撃エネルギー (+23℃)
3.1
J
ISO 6603-2
パンクチャー衝撃エネルギー (-30℃)
2.2
J
ISO 6603-2
熱的特性
融点 (10℃/min)
222
°C
ISO 11357-1/-3
荷重たわみ温度 (1.8MPa)
213
°C
ISO 75-1/-2
荷重たわみ温度 (0.45MPa)
220
°C
ISO 75-1/-2
線膨張係数 (流れ方向)
0.12
E-4/°C
ISO 11359-1/-2
線膨張係数 (垂直方向)
0.75
E-4/°C
ISO 11359-1/-2
電気特性
比誘電率 (100 Hz)
5.3
-
IEC 62631-2-1
比誘電率 (1MHz)
4.7
-
IEC 62631-2-1
誘電正接 (100 Hz)
164
E-4
IEC 62631-2-1
誘電正接 (1MHz)
177
E-4
IEC 62631-2-1
体積固有抵抗率
5.8E12
Ohm*m
IEC 62631-3-1
絶縁破壊強さ
33
kV/mm
IEC 60243-1
耐トラッキング指数
600
V
IEC 60112
その他特性
吸水率 (水中)
3.6
%
Sim. to ISO 62
吸湿率 (23℃/50％ RH)
1.3
%
Sim. to ISO 62
密度
1700
kg/m³
ISO 1183
材料特性
乾燥温度
80
°C
ドライエアーでの乾燥時間
2-6
h
残留水分量
0.05-0.15
%
acc. to Karl Fischer
溶融温度 (Tmin - Tmax)
270-290
°C
金型温度
80-120
°C
図表
用途
Engine Mounts
産業
Automotive
材料
Akulon® UltraFlow PA66 and Durethan® PA6 50% GF both exhibit excellent fatigue resistance, ideal for demanding structural applications. These materials deliver high mechanical performance while enabling significant weight reduction and design flexibility.}
Engine Mounts
産業
Automotive
材料
Akulon® UltraFlow PA66 and Durethan® PA6 50% GF both exhibit excellent fatigue resistance, ideal for demanding structural applications. These materials deliver high mechanical performance while enabling significant weight reduction and design flexibility.}
