Pocan® TF4237S1
30% Glass Fiber Reinforced, Injection Molding, Flame Retardant, Excellent Surface Properties
General Information
Pocan® is a high-quality brand of polybutylene terephthalate (PBT) and PBT blends crafted by Envalior. Pocan is known for its impressive resistance to heat and chemicals, outstanding electrical properties, strength and hardness. It is designed to cater to a wide range of industries, including automotive, electrical/electronics, lighting, household appliances, and sports & leisure.
Special features
- Good surface properties
General Document
Regulatory Affairs
- Absence Declaration BNST2023-11-16
- Absence Declaration Biocidal Products2025-11-21
- Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
- Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
- Absence Declaration Nano Materials2023-11-16
- Absence Declaration Ozone Depleting Chemicals and F-gasses2025-02-06
- Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2025-04-14
- Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
- Absence Declaration PFAS (PTFE containing)2025-01-31
- Absence Declaration POPs (Persistent Organic Pollutants)2025-10-21
- Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
- Absence Declaration Red Phosphorus2023-11-16
- Compliance Statement Sanctions and Embargos2025-11-24
- Conflict minerals declaration (EICC, GeSI)2025-10-21
- Deforestation Statement, Regulation (EU) 2023/1115 (EUDR)2025-11-03
- EMRT Statement2025-05-27
- Micro Plastics Statement2025-09-22
- Packaging Declaration EU Decision 97/129/EC (labelling)2024-04-17
- Packaging, Packaging Waste (EU) 2025/40 and CONEG declaration2025-06-24
- REACH Registration Statement2024-03-27
- RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
- SVHC, REACH Annex XIV and –XVII Statement2025-11-06
Yellow Card
Processing technology
Injection Molding
Injection Molding
Rheological properties
Melt volume-flow rate
9
cm³/10min
ISO 1133
Temperature
260
°C
ISO 1133
Load
2.16
kg
ISO 1133
Molding shrinkage (parallel)
0.3
%
ISO 294-4
Molding shrinkage (normal)
0.9
%
ISO 294-4
Mechanical properties
Tensile modulus
11000
MPa
ISO 527-1/-2
Stress at break
140
MPa
ISO 527-1/-2
Strain at break
2.2
%
ISO 527-1/-2
Flexural modulus
10700
MPa
ISO 178
Flexural strength
220
MPa
ISO 178
Flexural strain at flexural strength
2.5
%
ISO 178-A
Charpy impact strength (+23°C)
55
kJ/m²
ISO 179/1eU
Charpy impact strength (-30°C)
50
kJ/m²
ISO 179/1eU
Izod impact strength (+23°C)
50
kJ/m²
ISO 180/1U
Izod impact strength (-30°C)
50
kJ/m²
ISO 180-1U
Thermal properties
Temp. of deflection under load (1.80 MPa)
200
°C
ISO 75-1/-2
Temp. of deflection under load (0.45 MPa)
220
°C
ISO 75-1/-2
Vicat softening temperature (50°C/h 50N)
202
°C
ISO 306
Coeff. of linear therm. expansion (parallel)
0.2
E-4/°C
ISO 11359-1/-2
Coeff. of linear therm. expansion (normal)
0.8
E-4/°C
ISO 11359-1/-2
Burning Behav. at 0.75 mm nom. thickn.
V-0
class
IEC 60695-11-10
Thickness tested
0.75
mm
IEC 60695-11-10
Burning Behav. at 1.5 mm nom. thickn.
V-0
class
IEC 60695-11-10
Thickness tested
1.5
mm
IEC 60695-11-10
UL recognition
Yes
-
-
Burning Behav. at 3.0 mm nom. thickn.
V-0
class
IEC 60695-11-10
Thickness tested
3
mm
IEC 60695-11-10
UL recognition
Yes
-
-
Oxygen index
29.7
%
ISO 4589-1/-2
Ball pressure temperature
205
°C
IEC 60695-10-2
Glow Wire Flammability Index GWFI
960
°C
IEC 60695-2-12
GWFI (Thickness (1) tested)
0.75
mm
IEC 60695-2-12
Glow Wire Flammability Index GWFI
960
°C
IEC 60695-2-12
GWFI (Thickness (2) tested)
1.6
mm
IEC 60695-2-12
Glow Wire Ignition Temperature GWIT
800
°C
IEC 60695-2-13
GWIT (Thickness (1) tested)
0.75
mm
IEC 60695-2-13
Glow Wire Ignition Temperature GWIT
775
°C
IEC 60695-2-13
GWIT (Thickness (2) tested)
1.5
mm
IEC 60695-2-13
Glow Wire Ignition Temperature GWIT
750
°C
IEC 60695-2-13
GWIT (Thickness (3) tested)
3
mm
IEC 60695-2-13
Relative Temperature Index - electrical
140
°C
UL746B
RTI electrical (Thickness (1) tested)
0.75
mm
UL746B
Relative Temperature Index - with impact
105
°C
UL746B
RTI with impact (Thickness (1) tested)
0.75
mm
UL746B
Relative Temperature Index - with impact
110
°C
UL746B
RTI with impact (Thickness (2) tested)
3
mm
UL746B
Relative Temperature Index - without impact
115
°C
UL746B
RTI without impact (Thickness (1) tested)
0.75
mm
UL746B
Relative Temperature Index - without impact
120
°C
UL746B
RTI without impact (Thickness (2) tested)
1.5
mm
UL746B
Electrical properties
Volume resistivity
1E14
Ohm*m
IEC 62631-3-1
Surface resistivity
1E17
Ohm
IEC 62631-3-2
Electric strength
34
kV/mm
IEC 60243-1
Comparative tracking index
200
V
IEC 60112
Comparative tracking index (PLC)
3
class
UL 746A
Other properties
Density
1660
kg/m³
ISO 1183
Material specific properties
Drying temperature circulating air dryer
120
°C
Drying time circulating air dryer
4-8
h
Melt temperature (Tmin - Tmax)
260-270
°C
Mold temperature
80-100
°C
admissible residence time at Tmax
<5
min
