Pocan® BFN4232HR
25% Glass Fiber Reinforced, Injection Molding, Flame Retardant (halogen free), Hydrolysis Stabilized
General Information
Pocan® is a high-quality brand of polybutylene terephthalate (PBT) and PBT blends crafted by Envalior. Pocan is known for its impressive resistance to heat and chemicals, outstanding electrical properties, strength and hardness. It is designed to cater to a wide range of industries, including automotive, electrical/electronics, lighting, household appliances, and sports & leisure.
Special features
- Hydrolysis resistant or enhanced hydrolytic stability
General Document
Regulatory Affairs
- Absence Declaration BNST2023-11-16
- Absence Declaration Biocidal Products2025-11-21
- Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
- Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
- Absence Declaration Nano Materials2023-11-16
- Absence Declaration Ozone Depleting Chemicals and F-gasses2025-02-06
- Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2025-04-14
- Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
- Absence Declaration PFAS2025-01-31
- Absence Declaration POPs (Persistent Organic Pollutants)2025-10-21
- Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
- Absence Declaration Red Phosphorus2023-11-16
- Compliance Statement Sanctions and Embargos2025-11-24
- Conflict minerals declaration (EICC, GeSI)2025-10-21
- Deforestation Statement, Regulation (EU) 2023/1115 (EUDR)2025-11-03
- EMRT Statement2025-05-27
- Micro Plastics Statement2025-09-22
- Packaging Declaration EU Decision 97/129/EC (labelling)2024-04-17
- Packaging, Packaging Waste (EU) 2025/40 and CONEG declaration2025-06-24
- REACH Registration Statement2024-03-27
- RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
- SVHC, REACH Annex XIV and –XVII Statement2025-11-06
Yellow Card
Processing technology
Injection Molding
Injection Molding
Applications
Rheological properties
Melt volume-flow rate
30
cm³/10min
ISO 1133
Temperature
260
°C
ISO 1133
Load
5
kg
ISO 1133
Molding shrinkage (parallel)
0.5
%
ISO 294-4
Molding shrinkage (normal)
1
%
ISO 294-4
Mechanical properties
Tensile modulus
9000
MPa
ISO 527-1/-2
Stress at break
95
MPa
ISO 527-1/-2
Strain at break
2
%
ISO 527-1/-2
Flexural modulus
9100
MPa
ISO 178
Flexural strength
155
MPa
ISO 178
Flexural strain at flexural strength
2.4
%
ISO 178-A
Charpy impact strength (+23°C)
30
kJ/m²
ISO 179/1eU
Charpy impact strength (-30°C)
25
kJ/m²
ISO 179/1eU
Charpy notched impact strength (+23°C)
6
kJ/m²
ISO 179/1eA
Charpy notched impact strength (-30°C)
6
kJ/m²
ISO 179/1eA
Puncture - maximum force (+23°C)
500
N
ISO 6603-2
Puncture - maximum force (-30°C)
480
N
ISO 6603-2
Puncture energy (+23°C)
2.1
J
ISO 6603-2
Puncture energy (-30°C)
1.5
J
ISO 6603-2
Thermal properties
Melting temperature (10°C/min)
220
°C
ISO 11357-1/-3
Temp. of deflection under load (1.80 MPa)
200
°C
ISO 75-1/-2
Temp. of deflection under load (0.45 MPa)
215
°C
ISO 75-1/-2
Coeff. of linear therm. expansion (parallel)
0.25
E-4/°C
ISO 11359-1/-2
Coeff. of linear therm. expansion (normal)
1.1
E-4/°C
ISO 11359-1/-2
Burning Behav. at 0.75 mm nom. thickn.
V-0
class
IEC 60695-11-10
Thickness tested
0.75
mm
IEC 60695-11-10
Burning Behav. at 1.5 mm nom. thickn.
V-0
class
IEC 60695-11-10
Thickness tested
1.5
mm
IEC 60695-11-10
UL recognition
Yes
-
-
Burning Behav. at 3.0 mm nom. thickn.
V-0
class
IEC 60695-11-10
Thickness tested
3
mm
IEC 60695-11-10
UL recognition
Yes
-
-
Burning Behav. 5V at thickness h
5VA
class
IEC 60695-11-20
Thickness tested
1.5
mm
IEC 60695-11-20
UL recognition
Yes
-
-
Ball pressure temperature
195
°C
IEC 60695-10-2
Glow Wire Flammability Index GWFI
960
°C
IEC 60695-2-12
GWFI (Thickness (1) tested)
0.75
mm
IEC 60695-2-12
Glow Wire Flammability Index GWFI
960
°C
IEC 60695-2-12
GWFI (Thickness (2) tested)
1.5
mm
IEC 60695-2-12
Glow Wire Ignition Temperature GWIT
750
°C
IEC 60695-2-13
GWIT (Thickness (1) tested)
0.75
mm
IEC 60695-2-13
Glow Wire Ignition Temperature GWIT
800
°C
IEC 60695-2-13
GWIT (Thickness (2) tested)
1.5
mm
IEC 60695-2-13
Glow Wire Ignition Temperature GWIT
800
°C
IEC 60695-2-13
GWIT (Thickness (3) tested)
3
mm
IEC 60695-2-13
Electrical properties
Volume resistivity
>1E13
Ohm*m
IEC 62631-3-1
Surface resistivity
>1E15
Ohm
IEC 62631-3-2
Electric strength
30
kV/mm
IEC 60243-1
Comparative tracking index
600
V
IEC 60112
Comparative tracking index (PLC)
0
class
UL 746A
Other properties
Density
1500
kg/m³
ISO 1183
Material specific properties
Drying temperature circulating air dryer
120
°C
Drying time circulating air dryer
4-8
h
Residual moisture content
0.00-0.02
%
acc. to Karl Fischer
Melt temperature (Tmin - Tmax)
250-265
°C
Mold temperature
70-90
°C
admissible residence time at Tmax
<5
min
Diagrams
Applications
High voltage connector
Industry
Automotive
Material
Application requirements
Superior electrical performance
Dedicated high voltage
High mechanical strength
Material properties
CTI 600V, RTI 140°C
Halogen-free
UL94-V0 @ 0.75mm
Superior processability}
IGBT Frame
Industry
Automotive
- •} UL 94-V0
- •} Dimensional stability
- •} Halide free & free of conductive ions
- •} Thermal oxidative resistance
- •} Excellent aging performance
- •} Low moisture absorption
- •} Thermal shock resistivity
- •} CTI > 600V if creep distance is limited (for solar, energy storage, windmills)
IGBT Frame
Industry
Automotive
- •} UL 94-V0
- •} Dimensional stability
- •} Halide free & free of conductive ions
- •} Thermal oxidative resistance
- •} Excellent aging performance
- •} Low moisture absorption
- •} Thermal shock resistivity
- •} CTI > 600V if creep distance is limited (for solar, energy storage, windmills)
