Durethan® BKV30FN04
30% Glass Reinforced, Injection Molding, Flame Retardant (halogen free), Heat Stabilized
General Information
Durethan® is the trade name for our range of engineering thermoplastics based on polyamide 6 and polyamide 66. These polyamides are partially crystalline thermoplastics which offer an ideal combination of properties, especially for technical applications. They provide high mechanical strength and stiffness, good dielectric properties, high resistance to both heat and chemical attack, and good friction and wear properties.
Special features
- Heat stabilized
General Document
Regulatory Affairs
- Absence Declaration BNST2023-11-16
- Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
- Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
- Absence Declaration Nano Materials2023-11-16
- Absence Declaration Ozone Depleting Chemicals2024-06-27
- Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2023-11-16
- Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
- Absence Declaration PFAS2024-03-05
- Absence Declaration POPs (Persistent Organic Pollutants)2024-09-04
- Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
- Absence Declaration Red Phosphorus2023-11-16
- Compliance Statement EU Sanctions and Embargos2024-05-16
- Conflict minerals declaration (EICC, GeSI)2024-05-15
- Deforestation Statement, Regulation (EU) 2023/1115 (EUDR)2024-09-19
- Packaging Declaration EU Decision 97/129/EC (labelling)2024-04-17
- REACH Registration Statement2024-03-27
- RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
- SVHC, REACH Annex XIV and –XVII Statement2024-11-08
Yellow Card
Processing technology
Injection Molding
Injection Molding
Automotive OEM
CALLOUT
CALLOUT
OEM Specification
ASTM D6779 PA0220 G30 A33270 FF0008
ASTM D6779 PA0220 G30 A33270 FF0008
Rheological properties
Melt volume-flow rate
17
cm³/10min
ISO 1133
Temperature
260
°C
ISO 1133
Load
5
kg
ISO 1133
Molding shrinkage (parallel)
0.2
%
ISO 294-4
Molding shrinkage (normal)
0.7
%
ISO 294-4
Mechanical properties
Tensile modulus
10300
MPa
ISO 527-1/-2
Tensile modulus (-40°C)
11100
MPa
ISO 527-1/-2
Tensile modulus (40°C)
9360
MPa
ISO 527-1/-2
Tensile modulus (100°C)
4750
MPa
ISO 527-1/-2
Tensile modulus (120°C)
4270
MPa
ISO 527-1/-2
Tensile modulus (140°C)
3960
MPa
ISO 527-1/-2
Tensile modulus (160°C)
3720
MPa
ISO 527-1/-2
Tensile modulus (180°C)
3310
MPa
ISO 527-1/-2
Tensile modulus (200°C)
2730
MPa
ISO 527-1/-2
Stress at break
130
MPa
ISO 527-1/-2
Strain at break
3
%
ISO 527-1/-2
Flexural modulus
10200
MPa
ISO 178
Flexural strength
230
MPa
ISO 178
Charpy impact strength (+23°C)
60
kJ/m²
ISO 179/1eU
Charpy impact strength (-30°C)
55
kJ/m²
ISO 179/1eU
Charpy notched impact strength (+23°C)
<10
kJ/m²
ISO 179/1eA
Charpy notched impact strength (-30°C)
<10
kJ/m²
ISO 179/1eA
Izod notched impact strength (+23°C)
<10
kJ/m²
ISO 180/1A
Thermal properties
Melting temperature (10°C/min)
220
°C
ISO 11357-1/-3
Temp. of deflection under load (1.80 MPa)
205
°C
ISO 75-1/-2
Temp. of deflection under load (0.45 MPa)
219
°C
ISO 75-1/-2
Coeff. of linear therm. expansion (parallel)
0.2
E-4/°C
ISO 11359-1/-2
Coeff. of linear therm. expansion (normal)
0.8
E-4/°C
ISO 11359-1/-2
Burning Behav. at 0.4 mm nom. thickn.
V-0
class
IEC 60695-11-10
Thickness tested
0.4
mm
IEC 60695-11-10
Burning Behav. at 0.75 mm nom. thickn.
V-0
class
IEC 60695-11-10
Thickness tested
0.75
mm
IEC 60695-11-10
Burning Behav. at 1.5 mm nom. thickn.
V-0
class
IEC 60695-11-10
Thickness tested
1.5
mm
IEC 60695-11-10
UL recognition
Yes
-
-
Burning Behav. at 3.0 mm nom. thickn.
V-0
class
IEC 60695-11-10
Thickness tested
3
mm
IEC 60695-11-10
UL recognition
Yes
-
-
Burning Behav. 5V at thickness h
5VA
class
IEC 60695-11-20
Thickness tested
1.5
mm
IEC 60695-11-20
UL recognition
Yes
-
-
Oxygen index
32
%
ISO 4589-1/-2
Ball pressure temperature
209
°C
IEC 60695-10-2
Glow Wire Flammability Index GWFI
960
°C
IEC 60695-2-12
GWFI (Thickness (1) tested)
0.4
mm
IEC 60695-2-12
Glow Wire Flammability Index GWFI
960
°C
IEC 60695-2-12
GWFI (Thickness (2) tested)
0.75
mm
IEC 60695-2-12
Glow Wire Ignition Temperature GWIT
775
°C
IEC 60695-2-13
GWIT (Thickness (1) tested)
0.4
mm
IEC 60695-2-13
Glow Wire Ignition Temperature GWIT
775
°C
IEC 60695-2-13
GWIT (Thickness (2) tested)
0.75
mm
IEC 60695-2-13
Relative Temperature Index - electrical
140
°C
UL746B
RTI electrical (Thickness (1) tested)
0.4
mm
UL746B
Relative Temperature Index - with impact
105
°C
UL746B
RTI with impact (Thickness (1) tested)
0.4
mm
UL746B
Relative Temperature Index - with impact
115
°C
UL746B
RTI with impact (Thickness (2) tested)
0.75
mm
UL746B
Relative Temperature Index - without impact
130
°C
UL746B
RTI without impact (Thickness (1) tested)
0.4
mm
UL746B
Relative Temperature Index - without impact
140
°C
UL746B
RTI without impact (Thickness (2) tested)
0.75
mm
UL746B
Electrical properties
Relative permittivity (100Hz)
4
-
IEC 62631-2-1
Relative permittivity (1 MHz)
3.6
-
IEC 62631-2-1
Dissipation factor (100 Hz)
145
E-4
IEC 62631-2-1
Dissipation factor (1 MHz)
155
E-4
IEC 62631-2-1
Volume resistivity
>1E13
Ohm*m
IEC 62631-3-1
Electric strength
40
kV/mm
IEC 60243-1
Comparative tracking index
600
V
IEC 60112
Other properties
Water absorption
4.6
%
Sim. to ISO 62
Humidity absorption
1.5
%
Sim. to ISO 62
Density
1420
kg/m³
ISO 1183
Material specific properties
Drying temperature dry air dryer
80
°C
Drying time dry air dryer
2-6
h
Residual moisture content
0.03-0.07
%
acc. to Karl Fischer
Melt temperature (Tmin - Tmax)
250-280
°C
Mold temperature
70-90
°C
