Durethan® BKV50GW1 DUS037

50% Glass Reinforced, Injection Molding

General Information

Durethan® is the trade name for our range of engineering thermoplastics based on polyamide 6 and polyamide 66. These polyamides are partially crystalline thermoplastics which offer an ideal combination of properties, especially for technical applications. They provide high mechanical strength and stiffness, good dielectric properties, high resistance to both heat and chemical attack, and good friction and wear properties.
Special features
Regulatory Affairs
Processing technology
Injection Molding

Mechanical properties

Tensile modulus
16800
MPa
Stress at break
225
MPa
Strain at break
3
%
Flexural modulus
15500
MPa
Flexural strength
360
MPa
Charpy impact strength (+23°C)
100
kJ/m²
Charpy impact strength (-30°C)
90
kJ/m²
Charpy notched impact strength (+23°C)
20
kJ/m²
Charpy notched impact strength (-30°C)
15
kJ/m²
Izod notched impact strength (+23°C)
20
kJ/m²

Thermal properties

Melting temperature (10°C/min)
220
°C

Other properties

Density
1570
kg/m³

Material specific properties

Viscosity number
140
cm³/g
Drying temperature dry air dryer
80
°C
Drying time dry air dryer
2-6
h
Residual moisture content
0.03-0.12
%
Melt temperature (Tmin - Tmax)
270-290
°C
Mold temperature
80-120
°C