Durethan® BG30XH3.0LT, PA6-(GF+GB)30 - Envalior

Durethan® BG30XH3.0LT

30% Glass Fiber/Glass Beads, Injection Molding, Heat Stabilized, Laser Transparent Black, Low Warpage

General Information

Durethan® is the trade name for our range of engineering thermoplastics based on polyamide 6 and polyamide 66. These polyamides are partially crystalline thermoplastics which offer an ideal combination of properties, especially for technical applications. They provide high mechanical strength and stiffness, good dielectric properties, high resistance to both heat and chemical attack, and good friction and wear properties.

Special features

Heat stabilized
Low warpage

General Document

Regulatory Affairs

Absence Declaration BNST2023-11-16
Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
Absence Declaration Nano Materials2023-11-16
Absence Declaration Ozone Depleting Chemicals2024-06-27
Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2023-11-16
Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
Absence Declaration POPs (Persistent Organic Pollutants)2024-09-04
Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
Absence Declaration Red Phosphorus2023-11-16
Compliance Statement EU Sanctions and Embargos2024-05-16
Conflict minerals declaration (EICC, GeSI)2024-05-15
Deforestation Statement, Regulation (EU) 2023/1115 (EUDR)2024-09-19
Packaging Declaration EU Decision 97/129/EC (labelling)2024-04-17
REACH Registration Statement2024-03-27
RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
SVHC, REACH Annex XIV and –XVII Statement2024-11-08

Processing technology
Injection Molding

Rheological properties

Molding shrinkage (parallel)

0.5

ISO 294-4

Molding shrinkage (normal)

0.8

ISO 294-4

Mechanical properties

Tensile modulus

6400

MPa

ISO 527-1/-2

Stress at break

120

MPa

ISO 527-1/-2

Strain at break

ISO 527-1/-2

Flexural modulus

5800

MPa

ISO 178

Flexural strength

185

MPa

ISO 178

Charpy impact strength (+23°C)

kJ/m²

ISO 179/1eU

Charpy impact strength (-30°C)

kJ/m²

ISO 179/1eU

Charpy notched impact strength (+23°C)

<10

kJ/m²

ISO 179/1eA

Charpy notched impact strength (-30°C)

<10

kJ/m²

ISO 179/1eA

Izod notched impact strength (-40°C)

<10

kJ/m²

ISO 180/1A

Puncture - maximum force (+23°C)

700

ISO 6603-2

Puncture - maximum force (-30°C)

690

ISO 6603-2

Puncture energy (+23°C)

ISO 6603-2

Puncture energy (-30°C)

1.7

ISO 6603-2

Thermal properties

Melting temperature (10°C/min)

222

°C

ISO 11357-1/-3

Temp. of deflection under load (1.80 MPa)

190

°C

ISO 75-1/-2

Temp. of deflection under load (0.45 MPa)

210

°C

ISO 75-1/-2

Coeff. of linear therm. expansion (parallel)

0.3

E-4/°C

ISO 11359-1/-2

Coeff. of linear therm. expansion (normal)

0.9

E-4/°C

ISO 11359-1/-2

Burning Behav. at 1.5 mm nom. thickn.

class

IEC 60695-11-10

Thickness tested

1.5

IEC 60695-11-10

Glow Wire Flammability Index GWFI

650

°C

IEC 60695-2-12

GWFI (Thickness (1) tested)

IEC 60695-2-12

Electrical properties

Relative permittivity (100Hz)

4.5

IEC 62631-2-1

Relative permittivity (1 MHz)

IEC 62631-2-1

Dissipation factor (100 Hz)

265

E-4

IEC 62631-2-1

Dissipation factor (1 MHz)

220

E-4

IEC 62631-2-1

Volume resistivity

1E13

Ohm*m

IEC 62631-3-1

Comparative tracking index

375

IEC 60112

Other properties

Water absorption

Sim. to ISO 62

Humidity absorption

2.2

Sim. to ISO 62

Density

1360

kg/m³

ISO 1183

Material specific properties

Viscosity number

140

cm³/g

ISO 307, 1157, 1628

Drying temperature dry air dryer

°C

Drying time dry air dryer

2-6

Residual moisture content

0.03-0.12

acc. to Karl Fischer

Melt temperature (Tmin - Tmax)

270-290

°C

Mold temperature

80-120

°C