Durethan® BC30 DUS024

Injection Molding, Unreinforced, Impact Modified

Back to results

General Information

Durethan® is the trade name for our range of engineering thermoplastics based on polyamide 6 and polyamide 66. These polyamides are partially crystalline thermoplastics which offer an ideal combination of properties, especially for technical applications. They provide high mechanical strength and stiffness, good dielectric properties, high resistance to both heat and chemical attack, and good friction and wear properties.
Special features
General Document
Regulatory Affairs
  • Absence Declaration BNST2023-11-16
  • Absence Declaration Biocidal Products2025-11-21
  • Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
  • Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
  • Absence Declaration Nano Materials2023-11-16
  • Absence Declaration Ozone Depleting Chemicals and F-gasses2025-02-06
  • Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2025-04-14
  • Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
  • Absence Declaration POPs (Persistent Organic Pollutants)2025-10-21
  • Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
  • Absence Declaration Red Phosphorus2023-11-16
  • Compliance Statement Sanctions and Embargos2025-11-24
  • Conflict minerals declaration (EICC, GeSI)2025-10-21
  • Deforestation Statement, Regulation (EU) 2023/1115 (EUDR)2025-11-03
  • EMRT Statement2025-05-27
  • Micro Plastics Statement2025-09-22
  • Packaging Declaration EU Decision 97/129/EC (labelling)2024-04-17
  • Packaging, Packaging Waste (EU) 2025/40 and CONEG declaration2025-06-24
  • REACH Registration Statement2024-03-27
  • RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
  • SVHC, REACH Annex XIV and –XVII Statement2025-11-06
Processing technology
Injection Molding
Have a question? Contact us

Rheological properties

Molding shrinkage (parallel)
1.2
%
Molding shrinkage (normal)
1.55
%

Mechanical properties

Tensile modulus
2800
MPa
Yield stress
70
MPa
Yield strain
4
%
Nominal strain at break
%
Flexural modulus
2300
MPa
Flexural strength
90
MPa
Charpy impact strength (+23°C)
N
kJ/m²
Charpy impact strength (-30°C)
N
kJ/m²
Charpy notched impact strength (+23°C)
<10
kJ/m²
Charpy notched impact strength (-30°C)
<10
kJ/m²
Izod notched impact strength (+23°C)
<10
kJ/m²
Puncture - maximum force (+23°C)
4400
N
Puncture energy (+23°C)
60
J

Thermal properties

Melting temperature (10°C/min)
220
°C
Temp. of deflection under load (1.80 MPa)
55
°C
Temp. of deflection under load (0.45 MPa)
155
°C
Temp. of deflection under load (8.00 MPa)
45
°C
Coeff. of linear therm. expansion (parallel)
1
E-4/°C
Coeff. of linear therm. expansion (normal)
1.35
E-4/°C

Other properties

Water absorption
9
%
Humidity absorption
2.7
%
Density
1100
kg/m³

Material specific properties

Drying temperature dry air dryer
80
°C
Drying time dry air dryer
2-6
h
Residual moisture content
0.03-0.12
%
Melt temperature (Tmin - Tmax)
260-280
°C
Mold temperature
80-90
°C