Akulon® Ultraflow K-FPG8

Glass Reinforced, High Flow

Back to results

General Information

Akulon® is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon® grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon® sets the market standards.
Special features
  • Good or high flow
General Document
Regulatory Affairs
  • Absence Declaration BNST2023-11-16
  • Absence Declaration Biocidal Products2023-11-16
  • Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
  • Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
  • Absence Declaration EPA 20 High Priority Substances 20192023-11-16
  • Absence Declaration Food Allergens2023-11-16
  • Absence Declaration NMP (N-Methylpyrrolidone)2023-11-16
  • Absence Declaration Nano Materials2023-11-16
  • Absence Declaration Ozone Depleting Chemicals2024-06-27
  • Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2023-11-16
  • Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
  • Absence Declaration PFAS2024-03-05
  • Absence Declaration POPs (Persistent Organic Pollutants)2024-09-04
  • Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
  • Absence Declaration Red Phosphorus2023-11-16
  • Absence Declaration opBDE (2003/11/EC: Octa- / Pentabromodiphenylether)2023-11-16
  • Compliance Statement EU Sanctions and Embargos2024-05-16
  • Conflict minerals declaration (EICC, GeSI)2024-05-15
  • Deforestation Statement, Regulation (EU) 2023/1115 (EUDR)2024-09-19
  • Packaging Declaration EU Decision 97/129/EC (labelling)2024-04-17
  • Packaging, Packaging Waste and CONEG declaration (94/62/EC)2021-12-06
  • REACH Registration Statement2024-03-27
  • REACH STATEMENT KOREA2023-11-16
  • REACH STATEMENT TURKYE2023-11-16
  • RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
  • SVHC, REACH Annex XIV and –XVII Statement2024-11-08
Processing technology
Injection Molding
Design challenge
Downsizing & Miniaturization
Applications
Have a question? Contact us

Rheological properties

Melt volume-flow rate
60
cm³/10min
Temperature
275
°C
Load
5
kg
Melt flow index MFI
75
g/10min
MFI test load
5
kg
Molding shrinkage (parallel)
0.36
%
Molding shrinkage (normal)
0.89
%

Mechanical properties

Tensile modulus
11500
MPa
Stress at break
175
MPa
Strain at break
3.5
%
Charpy impact strength (+23°C)
90
kJ/m²
Charpy impact strength (-30°C)
90
kJ/m²
Charpy notched impact strength (+23°C)
20
kJ/m²
Charpy notched impact strength (-30°C)
13
kJ/m²

Thermal properties

Melting temperature (10°C/min)
220
°C
Temp. of deflection under load (1.80 MPa)
200
°C
Temp. of deflection under load (0.45 MPa)
215
°C
Coeff. of linear therm. expansion (parallel)
0.2
E-4/°C
Coeff. of linear therm. expansion (normal)
0.65
E-4/°C

Electrical properties

Relative permittivity (100Hz)
3.5
-
Relative permittivity (1 MHz)
3.3
-
Dissipation factor (100 Hz)
90
E-4
Dissipation factor (1 MHz)
150
E-4
Volume resistivity
>1E13
Ohm*m
Surface resistivity
Ohm
Electric strength
25
kV/mm
Comparative tracking index
V

Other properties

Water absorption
5.7
%
Humidity absorption
1.7
%
Density
1410
kg/m³

Diagrams

Applications

Airbag Containers

Industry
Automotive
Material
  • •} Reliable
  • •} Cost effective
  • •} Heat resistant
  • •} Lightweight
  • •} Function integration
  • •} High flowability enables thin wall designs
}
More information