Akulon® Ultraflow K-FHG6/B

30% Glass Reinforced, Heat Stabilized, High Flow, Improved Processing

Back to results

General Information

Akulon® is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon® grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon® sets the market standards.
Special features
  • Good or high flow
  • Heat stabilized
General Document
Regulatory Affairs
  • Absence Declaration BNST2023-11-16
  • Absence Declaration Biocidal Products2023-11-16
  • Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
  • Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
  • Absence Declaration EPA 20 High Priority Substances 20192023-11-16
  • Absence Declaration Food Allergens2023-11-16
  • Absence Declaration NMP (N-Methylpyrrolidone)2023-11-16
  • Absence Declaration Nano Materials2023-11-16
  • Absence Declaration Ozone Depleting Chemicals2024-06-27
  • Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2023-11-16
  • Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
  • Absence Declaration PFAS2024-03-05
  • Absence Declaration POPs (Persistent Organic Pollutants)2024-09-04
  • Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
  • Absence Declaration Red Phosphorus2023-11-16
  • Absence Declaration opBDE (2003/11/EC: Octa- / Pentabromodiphenylether)2023-11-16
  • Compliance Statement EU Sanctions and Embargos2024-05-16
  • Conflict minerals declaration (EICC, GeSI)2024-05-15
  • Deforestation Statement, Regulation (EU) 2023/1115 (EUDR)2024-09-19
  • Packaging Declaration EU Decision 97/129/EC (labelling)2024-04-17
  • Packaging, Packaging Waste and CONEG declaration (94/62/EC)2021-12-06
  • REACH Registration Statement2024-03-27
  • REACH STATEMENT KOREA2023-11-16
  • REACH STATEMENT TURKYE2023-11-16
  • RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
  • SVHC, REACH Annex XIV and –XVII Statement2024-11-08
Processing technology
Injection Molding
Design challenge
Downsizing & Miniaturization
Applications
Have a question? Contact us

Rheological properties

Melt volume-flow rate
40
cm³/10min
Temperature
275
°C
Load
2.16
kg
Molding shrinkage (parallel)
0.3
%
Molding shrinkage (normal)
1.1
%

Mechanical properties

Tensile modulus
9350
MPa
Stress at break
160
MPa
Strain at break
3
%
Flexural modulus
8700
MPa
Flexural modulus (120°C)
4000
MPa
Flexural modulus (160°C)
3700
MPa
Flexural strength
250
MPa
Flexural strength (120°C)
100
MPa
Flexural strength (160°C)
85
MPa
Charpy impact strength (+23°C)
85
kJ/m²
Charpy impact strength (-30°C)
65
kJ/m²
Charpy notched impact strength (+23°C)
12
kJ/m²
Charpy notched impact strength (-30°C)
10
kJ/m²

Thermal properties

Melting temperature (10°C/min)
220
°C
Temp. of deflection under load (1.80 MPa)
200
°C
Temp. of deflection under load (0.45 MPa)
220
°C
Coeff. of linear therm. expansion (parallel)
0.2
E-4/°C
Coeff. of linear therm. expansion (normal)
0.7
E-4/°C

Electrical properties

Relative permittivity (100Hz)
3.5
-
Relative permittivity (1 MHz)
3.3
-
Dissipation factor (100 Hz)
50
E-4
Dissipation factor (1 MHz)
150
E-4
Volume resistivity
>1E13
Ohm*m
Surface resistivity
Ohm
Comparative tracking index
V

Other properties

Water absorption
6
%
Humidity absorption
1.8
%
Density
1350
kg/m³

Rheological calculation properties

Density of melt
1120
kg/m³
Thermal conductivity of melt
0.27
W/(m K)
Spec. heat capacity melt
2250
J/(kg K)
Eff. thermal diffusivity
1.08E-7
m²/s

Diagrams

Applications

Fans & Shrouds

Industry
Automotive
Material
  • •} Reliable
  • •} High heat resistance
  • •} Excellent surface appearance
  • •} Low warpage levels
  • •} Cost effective
  • •} High flowability enables thin wall designs
}
More information

Garlic press

Industry
Consumer goods
Material
  • •} Glass-reinforced
  • •} Lower mold pressure
  • •} Lower energy consumption
  • •} Shorter cooling time
  • •} Enables thinner wall designs
}
More information

HVAC lamellae

Industry
Automotive
Material
  • •} Reliable
  • •} High heat resistance
  • •} Great surface appearance
  • •} Lightweight
  • •} Cost effective
  • •} High flowability enables thin wall designs
}
More information

Integrated Air Inlet Manifolds (up to 180°C)

Industry
Automotive
Material
  • •} Long-term heat resistance up to 230 C
  • •} Lower system costs compared to metal.
}
More information

Lift truck steering wheel

Industry
Industrial equipment
Material
  • •} Improved surface appearance
  • •} Lower molded-in-stress
  • •} Reduced warpage
  • •} Less required molding tonnage
  • •} Increased design freedom
}
More information

Oil Sumps and Pans

Industry
Automotive
Material
  • •} Proven track record with OEMs
  • •} Cost effective
  • •} Heat resistant
  • •} Better welding strength than PA66
  • •} Flowability enables thin wall designs
}
More information

Transmission Oil Pans

Industry
Automotive
Material
  • •} Proven track record with OEMs
  • •} Cost effective
  • •} Heat resistant
  • •} Better welding strength than PA66
  • •} Flowability enables thin wall designs
}
More information