Akulon® N24-LPG6

UV Stabilized, 30% Glass Reinforced, Impact Modified

Back to results

General Information

Akulon® is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon® grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon® sets the market standards.
Special features
  • U.V. stabilized or stable to weather
General Document
Regulatory Affairs
  • Absence Declaration BNST2023-11-16
  • Absence Declaration Biocidal Products2023-11-16
  • Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
  • Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
  • Absence Declaration EPA 20 High Priority Substances 20192023-11-16
  • Absence Declaration Food Allergens2023-11-16
  • Absence Declaration NMP (N-Methylpyrrolidone)2023-11-16
  • Absence Declaration Nano Materials2023-11-16
  • Absence Declaration Ozone Depleting Chemicals2024-04-25
  • Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2023-11-16
  • Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
  • Absence Declaration PFAS2024-03-05
  • Absence Declaration POPs (Persistent Organic Pollutants)2023-10-27
  • Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
  • Absence Declaration Red Phosphorus2023-11-16
  • Absence Declaration opBDE (2003/11/EC: Octa- / Pentabromodiphenylether)2023-11-16
  • Conflict minerals declaration (EICC, GeSI)2024-05-15
  • Packaging, Packaging Waste and CONEG declaration (94/62/EC)2021-12-06
  • REACH Registration Statement2024-03-27
  • REACH STATEMENT KOREA2023-11-16
  • REACH STATEMENT TURKYE2023-11-16
  • RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
  • SVHC, REACH Annex XIV and –XVII Statement2024-03-27
Processing technology
Injection Molding
Have a question? Contact us

Rheological properties

Melt volume-flow rate
20
cm³/10min
Temperature
275
°C
Load
5
kg
MFI test load
5
kg
Molding shrinkage (parallel)
0.4
%
Molding shrinkage (normal)
1
%

Mechanical properties

Tensile modulus
8500
MPa
Stress at break
120
MPa
Strain at break
3.5
%
Flexural modulus
7200
MPa
Flexural strength
180
MPa
Charpy impact strength (+23°C)
95
kJ/m²
Charpy notched impact strength (+23°C)
20
kJ/m²

Thermal properties

Temp. of deflection under load (1.80 MPa)
200
°C
Temp. of deflection under load (0.45 MPa)
215
°C

Other properties

Water absorption
5.7
%
Humidity absorption
1.7
%
Density
1320
kg/m³

Rheological calculation properties

Density of melt
1110
kg/m³
Thermal conductivity of melt
0.28
W/(m K)
Spec. heat capacity melt
2830
J/(kg K)
Eff. thermal diffusivity
8.99E-8
m²/s